AGFA Drystar 5500 Reference Manual Download Page 174

Page: 174 / 266

174

2900H EN 20071108

Controlling the Drystar 5500 via a remote PC (with browser)

RYSTAR

5500/5503 R

EFERENCE

MANUAL

Entering the operator level

To enter the operator level, enter the following user name and password:

•

User name: Operator

•

Password: Operator

This level enables the operator to follow print jobs and perform common
tasks.

Entering the Key-operator level

To enter the Key-operator level, enter the following user name and password:

•

User name: Drystar

•

Password: 5500

You now have access to the functions in the Key-operator mode.

Only one session is active at one time on one printer.

Mostly, the menu structure and the browser screens are structured in the same way
as the local display of the printer. Sometimes they differ slightly as in following
example:

Summary of Contents for Drystar 5500











































































































































































































































































Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands

AGFA Drystar 5500, Reference Manual

Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands