AGFA Drystar 5302 Technical Documentation Manual Download Page 151

Page: 151 / 459

DD+DIS150.05E

Repair and Service

Machine specific tools, software tools and auxiliary means

Printed copies of this document are not controlled.

The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.

Edition 1, Revision 0

Drystar 5302

Chapter 3.2/49

3 Software

Installation

You want to ...

Example

Refer to .....

Upgrade the SW to a higher
basic release

SW Upgrade from SW Rel.
1.80_C1 to 2.0.0_C1

Chapter 7,

Modifications

Update the SW with a patch SW Update from 1.8.0_C1 to

1.8.1_C1

3.1

Install SW on a new, empty
hard drive or.

Install SW 1.8.0_C1 on an
empty hard drive

3.2

Re-install the software on a
printer in ERROR - SYSTEM
FAILURE state.

Re-Install SW 1.8.0_C1 on a
printer that does not bootup
anymore.

3.3

•

A software upgrade is a functional extension. It is usually sold through

the Sales and Services Channels

•

A software update is a corrective modification of the basic software

version. It does not include new functionality. SW Updates (Patches) are
available on MedNet.

3.1

SW Update: Loading a SW Patch

This chapter describes the SW Update with a patch.

For instructions regarding SW upgrade to a higher basic release (e.g. SW
Upgrade from SW Rel. 1.80_C1 to 2.0.0_C1) refer to Chapter 7,
Modifications

A SW Update can be performed in two ways:

SW Update via ...

Refer to .....

Key-operator menu at the local keypad using the CF card

3.1.1

Service menu in the Webpages using the network
connection

3.1.2

2005-09-09 (Type

5366/100)

Agfa Company Confidential

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands

AGFA Drystar 5302, Technical Documentation Manual

Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands