AGFA CR 10-X Service Manual Download Page 133

Page: 133 / 288

DD+DIS155.11E

Repair and Service

Tools and auxiliary Means

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

Edition 1, Revision 1

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 17 of 31

03-2013

Type 5151 / 100 / 110 / 200 / 210

Agfa Company Confidential

2.4.5

Installation Wizard

Purpose

The installation wizard guides through the setup of the digitizer.

It starts automatically at first connection to the service user interface.

It calls following screens, one after another:



Digitizer

settings



Destination

Settings



Site specific Data



Installation

Date

Confirmation

As long as the installation date is not confirmed, the installation wizard is automatically
started when entering the service user interface.

The installation date is written to the configuration data of the digitizer (parameter
"Installation date" in the "Device Info" screen. See section 2.2.1).

The installation date cannot be changed anymore.

Usage

(1) Select service menu:

<Installation Wizard>

(2) Follow the further instructions.

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 133 / 288

Search results

Summary of Contents for CR 10-X

Reviews: