AGFA CR 10-X Service Manual Download Page 124

Page: 124 / 288

DD+DIS155.11E

Repair and Service

Tools and auxiliary Means

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

2.1

Logout

Purpose



Asks for performed interventions, to make corresponding entries in the

info counter.



Asks to perform a backup of the device specific data if data have been changed

during the service intervention.



Closes the session.

Usage

(1) Select service menu: <

Logout

(2) Follow the logout wizard.

Figure

2.2

General Info

2.2.1

Device Info

Purpose

Show the device specific data.

Usage

(1) Select service menu:

Device Info

Figure

Edition 1, Revision 1

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 8 of 31

03-2013

Type 5151 / 100 / 110 / 200 / 210

Agfa Company Confidential

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 124 / 288

Search results

Summary of Contents for CR 10-X

Reviews: