AGFA 6012/001 User Manual Download Page 9

Page: 9 / 124

About the safety notices in this document

The following samples show how warnings, cautions, instructions and notes

appear in this document. The text explains their intended use.

DANGER:

A danger safety notice indicates a hazardous situation of direct,

immediate danger for a potential serious injury to a user,

engineer, patient or any other person.

WARNING:

A warning safety notice indicates a hazardous situation which

can lead to a potential serious injury to a user, engineer, patient

or any other person.

CAUTION:

A caution safety notice indicates a hazardous situation which

can lead to a potential minor injury to a user, engineer, patient

or any other person.

An instruction is a direction which, if it is not followed, can

cause damage to the equipment described in this manual or any

other equipment or goods and can cause environmental

pollution.

A prohibition is a direction which, if it is not followed, can cause

damage to the equipment described in this manual or any other

equipment or goods and can cause environmental pollution.

Note

Notes provide advice and highlight unusual points. A note is

not intended as an instruction.

DR 100e (Digital Radiography) | Introduction to this Manual |

0365B EN 20181015 0853

Summary of Contents for 6012/001





























































































































Search results

Summary of Contents for 6012/001

Reviews:

Brands by name

Popular brands

AGFA 6012/001, User Manual

Search results

Summary of Contents for 6012/001

Reviews:

Brands by name

Popular brands