AGFA 5367/300 User Manual Download Page 63

Page: 63 / 168

The keypad

The keypad is displayed on the touchscreen. Press the keys on the touchscreen

to use the keypad funcions.

The keypad features the following keys:

Key-opera-

tor

key

To access the advanced functions of the Key-opera-

tor mode..

Escape key

To quit the current function or exit a menu without

saving modifications.

Confirm

key

(In Key-operator mode)

• To select a menu.
• To accept an entry in a menu.

key

• To move the cursor to the previous entry field.
• To scroll upwards.
• To increment the number in a(n) (alpha) nu-

merical entry field.

Down

key

• To move the cursor to the next entry field.
• To scroll downwards.
• To decrement the number in a(n) (alpha) nu-

merical entry field.

Left

key

• To scroll backwards through multiple choices

within a field.

• To move the entry position in a(n) (alpha) nu-

merical entry field from right to left.

Crystal-M Imager | Introduction |

3852B EN 20210601 1655

Summary of Contents for 5367/300









































































































































































Search results

Summary of Contents for 5367/300

Reviews:

Related manuals for 5367/300

Brands by name

Popular brands

AGFA 5367/300, User Manual

Search results

Summary of Contents for 5367/300

Reviews:

Related manuals for 5367/300

Brands by name

Popular brands