AGFA 5366/500 User Manual Download

Page: 106 / 148

Preventive maintenance schedule

The printer is designed for trouble-free operation. Maintenance and cleaning

involve only some minor user tasks. Refer to the following pages for the

appropriate cleaning procedure.

Interval

What to do?

Ad hoc

‘Cleaning and disinfection’

When image quality tends to degrade. An appro-

priate warning message is displayed.

‘Cleaning the print head’

Print head cleaning must be done when image quality problems occur.
Always consult your local service representative for complete maintenance

schedules.

Topics:

•

Safety guidelines

•

Recurrent safety tests

•

Cleaning and disinfection

•

Cleaning the print head

•

Calibrating the touchscreen

106

| DRY 1.4, DRY 2.4 | Preventive maintenance schedule

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands