AGFA 5366/400 User Manual Download

Page: 18 / 148

Disclaimer

Agfa assumes no liability for use of this document if any unauthorized

changes to the content or format have been made.
Every care has been taken to ensure the accuracy of the information in this

document. However, Agfa assumes no responsibility or liability for errors,

inaccuracies or omissions that may appear in this document. To improve

reliability, function or design Agfa reserves the right to change the product

without further notice. This manual is provided without warranty of any kind,

implied or expressed, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose.

Note

In the United States, Federal law restricts this device on order

of a physician for prescription use only.

| Drystar 5301 XL, Drystar 5302 XL | Drystar 5301 XL, Drystar 5302 XL

3731D EN 20210601 1655

Summary of Contents for 5366/400





















































































































































Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands

AGFA 5366/400, User Manual

Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands