AGFA 5366/400 User Manual Download

Page: 129 / 148

Plug & Play Installation Manual

The Plug & Play Manual is intended for both the printers with one and with

two trays.
The operation is identical for each input tray.

Note

This manual only deals with the printer equipped with two

trays. As the operation of the lower input tray is identical to the

upper input tray, this manual is also applicable for the printer

equipped with one tray.

Note

The device must only be operated according to its

specifications and its intended use. Any operation not

corresponding to the specifications or intended use may result

in hazards, which in turn may lead to serious injuries or fatal

accidents (for example electric shock). AGFA positively will not

assume any liability in these cases

Note

The device must only be installed and put into operation

under the specified conditions. For more information about

safety, security and use, refer to the Reference and User manual.

Topics:

•

Contents of the packages

•

Remove the packing materials

•

Remove the printer from the pallet

•

Unpack the accessories

•

Environment specifications

•

Remove the transport protections

•

Connect the cables

•

Verify film position tabs

•

Load film in the input trays

•

Startup the printer

•

Configure network settings

Drystar 5301 XL, Drystar 5302 XL | Plug & Play Installation Manual |

129

3731D EN 20210601 1655

Summary of Contents for 5366/400





















































































































































Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands

AGFA 5366/400, User Manual

Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands