Maintenance
DD+DIS013.02E
Section 12 / 4
ADC Solo
Edition 1, Revision 10
(Type 5155 / 100/200)
3
Maintenance Step by Step
3.1 Diagnostics
3.1.1
Questioning of the customer
•
Ask the customer for any problem that appeared since the last
maintenance.
3.1.2 Infocounter
Analysis
•
Service PC, required to analyze the infocounter
(1) Insert an empty floppy in the floppy
drive of the VME-Rack.
See Figure 1.
(2) In the service menu select
"Save on floppy"
with the
key and press
(3) select "Infocounter file" and press
(4) Remove the floppy from the floppy
drive and insert it in the Service
PC
(5) Unzip the file "5155_xxxx_icn.zip"
(xxxx stands for the serial number)
(6) Start an editor (e.g. notepad or
wordpad).
(7) Open the file
"\D_\infocounter\0\infocounter.txt"
(8) Evaluate the infocounter file.
MG3000
Infocounter
Figure 1
3.1.3
How to evaluate the Infocounter
Evaluation of infocounters.txt
What to check in the
infocounter
Comment
1.1 Device Info: Serial
number and
Installation date
Compare device serial number to section 11
“Technical Standard Modifications” and
section 13 “Field Service Bulletins” to determine
whether the device is modified or requires a
modification.
1.4 Software Info
It is recommended to have the latest software
installed. Before you upgrade to a new software,
make sure that your hardware is up to date.
2.2 Throughput
For throughput most important are the cycles per
day. They usually count between 50 and 200.
