3. Your headset is ready to wear.
4. Use the headset for program mode
1 to 3 when indicated in the LCD display.
2. Face the contact points towards the
headset and press the application wand
into the headset using light pressure.
5. To remove the application wand from the
headset for handheld operation push the
wand (with the cable attached) lightly towards
the centre of the headset until it pops out.
6. For program mode 4 – 6, use the wand
attached to the cable and plug it into the
unit. Please note that without the headset,
only the wand with the cable will work. We
recommend clipping the provided handle
into the back of the wand.
1. Take the application wand.
2.3 HOW TO APPLY THE HEADSET AND WAND:
R
L
R
L
2.3 HOW TO APPLY THE HEADSET AND WAND:
1.Take the application wand
3. Place the conductive sponges
onto the wand and press to
fix the silicon on top
5. Now use the small bottle to
drip water until the sponge is
wet to the touch.
Repeat on the 2
nd
application wand if needed
2. Peel off the plastic cover
4.
Finished
Electical contacts
Electical contacts
Electical contacts
Electical contacts
11
10
