1.3.2 Fire Prevention and First Aid
Be prepared for emergencies.
Keep a first aid kit handy for treatment of minor
cuts and scratches.
Due to the nature of the crops this machine will
operate in, the risk of fire is of concern.
Always carry one or more fire extinguishers of the
correct type. Check fire extinguishers regularly as
instructed by the manufacturer. Make sure fire
extinguishers are properly charged and in
operating condition.
Use a water type fire extinguisher or other water
source for a fire in crop.
GUID-423D4C47-E2CF-487A-BAAF-73E8EB3D4516-high.jpg [High]
Fig. 25
Know how to operate the fire extinguisher before operating the machine.
For fires involving anything other than crop, such as oil or electrical components, use a dry chemical fire
extinguisher with an ABC rating.
Mount fire extinguishers within easy reach of where fires can occur.
Frequently remove accumulated crop material from the machine and check for overheated components.
Check the machine daily for any noises that are not normal. Such noises could indicate a failed component
that can cause excess heat.
If any flame cutting, welding, or arc welding is to be done on the machine or attachments, make sure to
clear any crop material or debris from around the area. Make sure the area below the work area is clear of
any flammable material as falling molten metal or sparks can ignite the material.
If fire occurs stand upwind and away from smoke
from the fire.
GUID-886D2A98-DA55-43DF-939F-A25686B18603-high.jpg [High]
Fig. 26
GUID-58F4B03F-6549-4093-9A80-70B738E53DA1 [V1]
1. Safety
28
BC 800
ACW1493520