AGCO Massey Ferguson 9195, Service Manual

Page: 14 / 41

4283440M1 01-11
Safety
When it is necessary for the header or the reel to be in the
raised position, raise the header or reel all the way and
engage the cylinder stops. See Cylinder Stops in this
section for more information.
WARNING: Always install the header lift cylinder
stops when working near the header. Do
not rely on the hydraulic system to keep the
header raised. A sudden loss of hydraulic
pressure could cause the header to lower
unexpectedly.
Remove spilled oil, antifreeze or fuel immediately from
operator's ladder and platform and other access areas.
Keep all access areas clean and free of obstructions.
Fire Prevention and First Aid
Be prepared for emergencies.
Keep a first aid kit handy for treatment of minor cuts and
scratches.
Always carry one or more fire extinguishers of the correct
type. Check fire extinguishers regularly as instructed by
the manufacturer. Make sure fire extinguishers are
properly charged and in operating condition.
Due to the nature of the crops this machine will operate in,
the risk of fire is of concern. Use a water type fire
extinguisher or other water source for a fire in crop.
For fires involving anything other than crop, such as oil or
electrical components, use a dry chemical fire
extinguisher with an ABC rating.
Mount fire extinguishers within easy reach of where fires
can occur.
Frequently remove accumulated crop material from the
machine and check for overheated components. Check
the machine daily for any noises that are not normal.
Such noises could indicate a failed component that can
cause excess heat.
If any flame cutting, welding, or arc welding is to be done
on the machine or attachments, make sure to clear any
crop material or debris from around the area. Make sure
the area below the work area is clear of any flammable
material as falling molten metal or sparks can ignite the
material.
FIG. 21
Wc1939
FIG. 22
S-1131