AGCO Massey Ferguson 1700M Series, Workshop Service Manual

Page: 34 / 51

1.4.7 Power take-off specifications
1735M 1740M 1750M 1755M 1760M
Type Independent, engine driven
Control Electro-hydraulic control
Clutch Hydraulically engaged, multiple plate wet disc
Rear PTO shaft
Type 35 mm (1.375 in) diameter, 6 spline
Output Clockwise rotation
Engine speed at
540 PTO rpm
Power shuttle: 2430 rpm Power shuttle:
2378 rpm
Hydrostatic: 2504 rpm
Mid-PTO shaft (optional)
Shaft Size 25 mm (0.983 in) diameter, 15 spline
Output Clockwise rotation
Mid-PTO speed
at 2600 engine
rpm
Power shuttle: 1916 rpm Power shuttle:
2023 rpm
Hydrostatic: 1916 rpm
1.4.8 Front axle specifications
1735M 1740M 1750M 1755M 1760M
Engagement Mechanical
Joint on axle Bevel gear
Turn angle 56° inward 57° inward
Oscillation angle 7° to 9° 6° to 8°
Steering Hydrostatic
Front wheel drive
ratio
1.6226 1.6227 Power shuttle:
1.6837
Hydrostatic:
1.6227
Wheel Alignment
Toe-in 2 mm to 8 mm (0.08 in to 0.32 in)
Front Axle 1735M / 1740M 1750M / 1755M / 1760M
Center pivot axle diameter 62 mm (2.441 in) 55 mm (2.17 in)
Front differential housing width 145.5 mm (5.729 in) 98 mm (3.861 in)
Pivot housing bushing bore 67 mm (2.638 in) 60 mm (2.362 in)
Bearing cover shaft diameter - 35 mm (1.378 in)
Housing shaft diameter 65 mm (2.559 in)
4
GUID-D12E42F6-394D-41C1-90CB-4E54625D527F [V1]
GUID-691F7EB7-7974-4AEA-BB85-38190CBD54EC [V2]
1. General
1700M Series Compact Tractors 1-31
4283619M1