AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 95 / 168

6.
Make sure that the bale mat hangs behind
the wrapping table.
GUID-4A35203A-02D3-43B6-8E0F-BE15A177914B-high.jpg [High]
Fig. 41
3.4.11 Operating Position of the Bale Tipper (optional)
GUID-4DE2CFC5-C915-4D9B-BEF7-5D6C61D53ED9-high.jpg [High]
Fig. 42
Procedure
1.
Make sure that the tractor engine is "OFF" and the key removed.
2.
Release the wrapping ring safeguard 1 and the wrapping ring safeguard 2.
3.
Start the tractor engine, on the controller go to the page “Adv. Menu > Manual Control”.
a) Make sure that the wrapping table is in the work position (down), use the line “Table tilt”.
4.
Stop the tractor engine and remove the key.
5.
Remove the pins and brackets that attach the bale tipper to the wrapping table.
GUID-7A78CBB6-EFBE-44A1-9251-0CD51848AD3D [V1]
3. Operation
Baler Wrapper Combination 95
4900.LE.EN01