AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 11 / 168

1.2.2 Safe Driving
Read and understand the general safety instructions. Make sure that:
• You always obey your local road traffic regulations and the speed limits
• The drawbar and the parking jack are in the drive position
• The machine is in the transport position
• The tailgate is not open and locked
• The trailed steering axle (if present) is locked
• All parts that move (for example the folding components and covers) are locked
• The wrapping ring and wrapping table are in the transport position
• The control panel and the hydraulic system of the tractor are off
• All the lamps on the machine operate correctly and are clean from dirt
• Set the work lamps to "OFF"
• Examine the operation of the brakes before you start to drive. Do not drive with the machine if there is a
problem with the brakes
• Do not make sudden turns when on a slope
• Drive slower when on a down slope
• Do not disengage the clutch of the tractor or change gears on a slope
• Do not transport one more person, unless there is a second seat in the tractor.
1.2.3 Safe Driving on Hillsides
Add to the general safety instructions and the other instructions for safe driving:
• Only persons with approval can operate the machine on slopes
• Do not open the tailgate in very bad locations for example on a slope and think how the change in the
point of gravity of the machine, because of the open tailgate will have an effect
• Do not put the machine in dangerous locations on a slope, know the centre of gravity of the machine
when the tailgate is open, or the wrapping ring lifted
• Always use an applicable tractor for slopes.
Related Links
To Move the Machine without Brakes page 108
1.2.4 Public Road Transport Safety
Read and understand the general safety instructions before you drive on the road. When you drive on the
road:
• Obey the local road traffic laws
• Keep a safe distance from other traffic
• Make sure that the plug for the lighting cable fully connects to the tractor socket and the lamps operate
correctly
• Use warning lamps or other safety signs, if necessary
• If necessary by local law install the rear marking plate for Slow Moving Vehicles (SMV) on to the
machine
• If necessary by local law install the licence plate on the machine
• If necessary by local law install the safety chains. Connect them to a rigid part of the tractor
• If there is a hydraulic brake system, always connect the safety brake cord (optional)
• Remove loose objects that can fall off the machine, for example, loose crops, mud or soil
GUID-E6E94976-2F90-4C7C-B220-AB1EC3907FE2 [V1]
GUID-8A0A5F78-2C87-443A-A4AA-4E470FD1D5E6 [V1]
GUID-994EA56E-A49F-4579-B603-C68FBA5342D2 [V1]
1. Safety
Baler Wrapper Combination 11
4900.LE.EN01