AGCO Glencoe CC4450, Operator'S Manual

Page: 10 / 37

SAFETY
ROCKSHAFT LOCKUP OPERATION
To install lockup:
1. Raise implement to full height.
2. Remove lockup from storage position and
attach lockup to frame (Fig. 8).
3. Insert lockup pin and install clip pin.
Attach lockup to rockshaft in storage position when
not in use (Fig. 9).
SMV SIGN
The sign is mounted on the rear bar left of the
machine centerline (Fig. 10).
6
Fig. 8 - Lockup in Lockup Postion
Fig. 9 - Lockup in Storage Postion
1. Lockup
Fig. 10 - SMV Sign
Decal P/N 360459
C445-5A-1
360459
1
1
C445-6A-1
71379434
C445-49A-1