INTRODUCTORY REMARKS
◊
This manual is subdivided in sections marked by two--digit numbers, with independent page numbering within
each section.
For a quick reference, these sections have the same identification number and the same description of the
relevant Flat Time Rate Manual.
◊
The dealt matters and the information can be easily detected by index on the following pages.
◊
At the bottom of each page there is the manual print number and the relevant publication/up--dating date.
◊
The pages of further up--datings shall have the same print number of the current publication, changing the
last digit (for example: first up--dating 327208011; second up--dating 327208012; etc.) and the relevant publi-
cation date.
These pages shall be completed by the new print of the index, duly revised.
◊
The information of this manual are up--dated at the date of the publication.
As AGCO continuously improves its product range, some information could be not up--dated due to modifica-
tions of technical or commercial type, as well as for suiting the law regulations of the different countries.
In case of disagreement, refer to AGCO Sales and Service networks.
IMPORTANT CAUTION
◊
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the AGCO
Service Network, strictly complying with the instructions given and using, whenever required, the special
tools.
◊
Anyone who carries out the above operations without complying with the prescriptions shall be responsible
for the subsequent damages.
◊
The Manufacturer and all the organizations of its distribution chain, including -- without limitation -- national,
regional or local dealers, reject any responsibility for damage due to the anomalous behaviour of parts and/or
components not approved by the manufacturer himself, including those used for the servicing or repair of the
product manufactured or marketed by the Manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the Manufacturer
in case of damages due to an anomalous behaviour of parts and/or components not approved by the Manu-
facturer.
LITERARY AND ARTISTIC COPYRIGHT
OF LAVERDA S.p.A.
No reproduction, though partial, of
text and illustrations allowed
PRINTED IN ITALY
AGCO Limited -- Banner Lane -- Coventry -- England CV4 9GF
S
E
R
V
I
C
E
Print no.
327208010
-- First Edition -- 01--2005
Find manuals at http://best-manuals.com/search?&s=FENDT-LA327208010F.PDF
