
Instruction for using
Please use the car
adaptor and
use the cigarette lighter
connector. Turn on
the
car air purifier
,
then all the indicators
on the panel
flash
for
one second
which means
the power is
on
.
Button
diagram
Turn on
the car
air
purifier
05
Breathe light
Power
light
Intelligent
low
high
1.At this
moment
,
it is in standby state
,
the power button is on
(
red
)
.
2.Press it
to work.
once to start the machine
,
the machine is turned on
,
the default mode is smart one,
the sensor
module starts
At this
point
,
the blue border
the machine is shut down, and all lights off,
and
turn off the sensor power
.
of the power
button is
on (red),press
it
for3
seconds
,
One
touch
When the machine is on
,
it enters
into
smart mode automatically
,
press
it
again and
enters
into
the control
of
the wind volume
,
low-High
-
smart
-
low
,
under
the
cycle regulation
.
When the machine is on
,
it enters
into
smart mode automatically
,
then
the
blue light
around
the start button flashes
.
Press
the start button again
,
the blue light is off and
turns into
the control
of
the wind volume
.
Note: TVOC sensor needs three minutes to prepare for working, so it is normalthat
minutes, the right indication is on after three minutes.
the breathe light is red within 3
Setting the wind volume
INTELLIGENT
HIGH
Low