Agbar Musa iMeter IMI-40-E, Manual

Page: 5 / 16

20110810_iMeter_guidelines.doc Page 5/16 10/08/2011
Type of pulse captor function
pulse
captor iMeter
GND brown brown
Itron Cyble 2 wires
Pulses (BF) white white
GND brown brown
Pulses (AF) grey white
Direction yellow yellow
Itron Cyble 5 wires
Cable cut
detection green green
GND brown brown
Sensus HRI-A1
Pulses (I1) white white
GND black brown
Pulses yellow white
Direction white yellow
Elster PR6-PR7
Cable cut
detection brown green
GND brown brown
Pulses white white
Sappel Pulsar 3 wires
Tamper green green
GND brown brown
Pulses white white
Direction yellow yellow
Sappel Pulsar 4 wires
Cable cut
detection green green
Table 1. iMeter and pulse captor connections by brands and models
The wiring must be done waterproof, using proper water protection connections. That is up to the
installer but we recommend making them with waterproof gel connectors, and placing the
connection inside a plaster waterproof box, with a high IP.
Notice that, in some cases the iMeters are manufactured directly connected to the pulse captors. In
this case there is no need to care about the connections, as they are already done and waterproof.
At this point the iMeter is connected to the pulse captor. The pulse captor must be placed on the
water meter. Each brand of meters has its own fixing system which normally is done by a screw on
the meter front.