CONVERSION
Check the appliance is electrically safe and gas sound when you have finished.
43
Down on the left-hand side.
Up on the right-hand side
Make sure the inner
rail is pulled forwards
Removing the Drawer
(Access to rating plate)
NOTE:
To avoid exterior damage to the storage drawer. Place
a soft cushioned mat on the floor.
Push the ends of the plastic clips (
Fig. 11.1
and
Fig. 11.2
) to
release the catches holding the drawer to the side runners.
At the same time pull the drawer forward and away from the
side runners.
Fitting the Drawer
To fit the drawer, pull the side rails fully out (
Fig. 11.3
).
Carefully move the drawer back between the rails and rest it
on the side rails.
At each side, hold the front of the drawer and pull the side
rail forward so that the clips click into position, holding the
drawer to the side rails (
Fig. 11.4
).
Fig. 11.1
Fig. 11.2
Fig. 11.3
Fig. 11.4
11. Rating Plate