LIGHTING
1.
Before lighting the stove, ensure that any build up of ashes in the fire
box has been removed and that the ashpan has been emptied.
2.
Open the firebox and cover the grate with crumpled pieces of paper.
3.
Lay pieces of kindling on top of the paper towards the back of the fire
box.
4.
Open the primary air inlet by turning the spin valve at the front of the
stove anticlockwise. (See Fig.7).
5.
Open the secondary air control by sliding the control knob located over
the top of the fire door to the left (See Fig.7a).
6.
Ignite the paper and close the firedoor.
7.
When the kindling is well alight, open the fire door and add more
kindling of a larger size to sustain the fire. Close the firedoor. Do not
operate this appliance with the firedoor open.
8.
Never use inflammable liquid i.e. gasoline, petrol paraffin etc. to start
or freshen up a fire in this heater.
9.
When a hot bed of fuel is established, add the normal fuel and adjust
the spin valve to the required setting.
10.
When re-fuelling open the firedoor and reload, close the firedoor.
11.
To shut the fire down, do not add fuel, make sure that the firedoor is
properly closed and that the primary secondary and tertiary air
controls are all in the closed position. Cutting off the air supply will
reduce the heat output.
This appliance is hot whilst in operation.
Keep children, clothing and furniture a safe distance away.
7
