8
Electrical and Water connection
A 13 Amp socket with an efficient earth should be made available for
the electrical mains connection, as well as an omnipolar switch which
can easily be reached after the appliance has been installed.
Do not use extension cords or adapters.
Electrical connection
Water connection
For connection to the water supply system (for appliances equipped
with ice maker) a tap with a male 3/4” connection should be provided,
which must also be easily accessible once the appliance is installed.
The appliance is provided with a water supply hose and seal kit which
is suitable for high water pressure and complies the Food Regulations.
The water filter cartridge, which is provided with the appliance, should
be installed according to the accompanying instructions.
Use only the new hose and the new gaskets which are supplied with the
appliance. Discard any hose and gasket which may have already been
installed.
The appliance should be connected only
to a drinkable water supply system, in
accordance with current laws in the country
where the appliance is being installed.
Make sure that the the power supply cable is
properly plugged into its seat as per drawing on
facing page. The cable must be secured with
the specific cable clamp.
Do not use extension cords or adapters.
The built in filter cannot make safe for drinking
any water which is not suitable for human
consumption.
Summary of Contents for 599 Premium Wine Cellar Series
Page 1: ...P R E M I U M S E R I E S I N S T A L L A T I O N G U I D E ...
Page 2: ......
Page 4: ...2 ...
Page 15: ...04 09 2008 ...