Page 3
Exploded View/Parts List:
FSBK-2 (5300975)
If your existing sprayer has a 1/2” I.D. hose sup-
plying your original boom and you now have a
boom with 3/8” I.D. hose, this conversion kit allows
you to easily convert your supply line to fit onto the
3/8” I.D. hose of your new boom.
Slip the hose mender’s 1/2” barb (larger side) into
your existing 1/2” feeder hose and clamp in place
with (existing) original hose clamp. Slip the
(included) 3/8” hose (5-1/2” long) onto the 3/8”
barb of the hose mender and clamp in place with
one of the supplied hose clamps.
Now attach the open end of the hose onto the
fitting on your boom which accepts the feeder line
hose. Make sure you place the hose clamp onto
that hose prior to attaching it to your boom.
Nozzle
Assembly
#5277926
1/2” to 3/8” Conversion Kit
(Existing) Boom Mount Brackets
Excellent spray distribution for uniform coverage along
the boom.
Nozzle design incorporates a pre-orifice to produce larger
droplets for less drift.
Based on the minimum overlap required to obtain uniform
distribution with 120° tips and 40” spacing.
Suggested Minimum Spray Height: 18”-20” above what is
being sprayed (to plant, not ground).
Optimum Spray Height: 39”
Wide angle spray nozzle height is influenced by nozzle
orientation. The critical factor is to achieve a minimum 30%
overlap.
