manualshive.com logo in svg

AG Neovo PN-55D2, User Manual

Share
Download
AG Neovo PN-55D2 User Manual Download Page 67

63

6.1 Warning Messages

Warning Messages

Cause

Solution

Cannot display this video mode

The resolution or the refresh rate of 
the graphics card of the computer 
is set too high.

•  Change the resolution or the 

refresh rate of the graphics 
card.

No Signal

The LCD display cannot detect the 
input source signal.

•  Check if the input source is 

turned ON.

•  Check if the signal cable is 

properly connected.

•  Check if any pin inside the 

cable connector is twisted or 
broken.

Local KB Lock

The operation using the control 
panel buttons has been locked by 
the user.

•  Disable the Local KB Lock 

function, press the   button and 
buttons 1 9 9 8 on the remote 
control. Refer to “KB lock” on 
page 57.

RC Lock

The operation using the remote 
control buttons has been locked by 
the user.

•  Disable the RC Lock function, 

press the   button and buttons 1 
9 9 8 on the remote control. Refer 
to “RC Lock” on page 58.

CHAPTER 6: APPENDIX

Summary of Contents for PN-55D2













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands