9
FRONT PANEL CONTROL
•
/
Power Button:
Press this button to turn the monitor ON or OFF, and display the monitor’s state.
•
Power Indicator:
Blue
—
Power On mode.
Orange — Standby mode.
•
MENU / ENTER:
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status.
•
- / ECO hotkey:
Activates ECO control when the OSD is off or adjust a function when function is
activated.
•
+ /
:
Activates the volume control when the OSD is off or adjust a function when
function is activated.
•
Auto/ Source / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2. When OSD menu is in off status, press this button to
select input Source: D-
Sub/DVI/HDMI.
3. When OSD menu is in off status, press this button for 2 seconds to
activate
the Auto Adjustment function. The Auto Adjustment function is used to set
the HPos, VPos, Clock and Focus.
OSD Lock Function:
To lock the OSD, press and hold the MENU button while the
monitor is off and then press power button to turn the monitor on. To un-lock the
OSD - press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators or air
ducts, or in a place subject to direct sunlight, or excessive dust or mechanical
vibration or shock.
•
Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed at
the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with a mild detergent
solution. Never use strong solvents such as thinner, benzene, or abrasive
cleaners, since these will damage the cabinet. As a safety precaution, always
unplug the monitor before cleaning it.
•
Do not scratch the screen with hard things, it may cause permanent
damage.
•
Don’t leak liquid into monitor which will result in the damage of component.
Summary of Contents for L Series
Page 1: ......
