HIP-Series HDMI over IP Extenders
9
Setup HIP-TA and HIP-RA
An HTTP server is embedded into every HIP-TA and HIP-RA, you can setup the IP address for
each unit via web browser.
The default IP address of the TX is 192.168.168.55, MAC address is: 00:0b:78:00:60:01.
The default IP address of the RX is 192.168.168.56, MAC address is: 00:0b:78:00:60:02.
Step 1: Assign the PC (or laptop) IP address on the computer : “Control Panel”→”Network
Connections”→“Local Area Connections
Status”→“Properties”→“Internet Protocol (TCP/IP)”, fill in the IP address field with
192.168.168.11 (0-255) and Subnet mask with 255.255.255.0. After that press OK to save the
configuration.
Note: The IP address of PC should be different from the IP addresses of HIP-TA and HIP-RA
units.
Step 2: Use an Ethernet cable to connect the PC and the extender. the power LED for the
extender should become red and the status LED green.
