© Copyright LOTRONIC 2015 IPAR-507
Page 10
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending
on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-‐free cloth. Never use alcohol or solvents.
CAUTION
: Disconnect from mains before starting maintenance operation!
Cleaning and Using Frequency of Product
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light clean.
Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use the high
quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or chemical solvent. The
inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced, find out
the faulty and restart the light. But please note the repair must be handled by professional.
TECHNICAL SPECIFICATIONS
DMX Channels: ........................................................................................................................... 4 / 12
Beam angle: ................................................................................................................................... 25°
Control mode: ............................................................................... Auto, Master/ Slave, DMX, sound
LED power: ............................................................................................. 7 x 15W RGBAW LEDs 5-‐in-‐1
Life time led .................................................................................................................. 50000 hours
IP norm: …………………………………………………………………………………………………..………………………..……IP-‐65
Working environment: .......................................................................................... indoor / Outdoor
Voltage: .......................................................................................................... AC 100-‐240V / 50-‐60Hz
Dimensions: ............................................................................................................ 255x253x255mm
Weight: ....................................................................................................................................... 3,5Kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
