AFX CAN AM MAVERICK X3 MAX PRO032 Installation Manual Download Page 4

Page: 4 / 4

Place the central screw and torwue bearsto 35lb ft.

Frontal Tube with 3/8 x 2 1/2” screw.

Locate the dimples in the factory plastics and drill with a 1/4”

drill bit and after with the 2 “ hole saw.

Place and align the rockslider on the 2” perforations that were

made.

Locate the factory dimples

Use a 3/8 x 2 1/2” screw and place from the back, starting from

the front and rear perforation. (Do not tighten yet)

Frontal Tube with

3/8 x 2 1/2” Screw

Rear Tube with 3/8 x 2 1/2” Screw

Align

Summary of Contents for CAN AM MAVERICK X3 MAX PRO032

Page 1: ...INSTALLATION MANUAL CAN AM MAVERICK X3 MAX ROCKSLIDERS PRO032 info afxmotorsports com THIS PRODUCT IS FOR OFF ROAD USE ONLY ...

Page 3: ...O INSTALL Now you have completed the installation Rear Tube Frontal Tube Central Tube 5 Repeat from Step 1 to 4 on the driver s side Passenger s Rockslider 1 4 Drill bit 2 Hole saw with pilot bit drill Rear Tube Frontal Tube Central Tube Pilot Rockslider ...

Page 4: ...ith a 1 4 drill bit and after with the 2 hole saw 3 Place and align the rockslider on the 2 perforations that were made Locate the factory dimples Use a 3 8 x 2 1 2 screw and place from the back starting from the front and rear perforation Do not tighten yet Frontal Tube with 3 8 x 2 1 2 Screw Rear Tube with 3 8 x 2 1 2 Screw Align Align Align ...