© Copyright LOTRONIC 2012 STROBE RGBW LED PRO
Page 5
DMX TABLE
CH1
0~255
Red
CH2
0~255
Green
CH3
0~255
Blue
CH4
0~255
White
CH5
11~255
LED Strobe
（
From slow to fast
）
CH6
11~50
Auto1 DMX (Strobe)
51~100
Auto2 DMX (No Strobe)
101~150
Auto3 DMX (
Gradual change
)
151~200
Sound1 DMX (Strobe)
201~250
Sound2 DMX (No Strobe)
251~255
Sound3 DMX (
Gradual change
)
CH7
0~255
Auto DMX/ Sound DMX Speed (Slow--Fast)
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions
depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have
to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION
: Disconnect from mains before starting maintenance operation!
Cleaning and Using Frequency of Product
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light clean.
Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use the high
quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or chemical solvent.
The inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced, find
out the faulty and restart the light. But please note the repair must be handled by professional.