© Copyright LOTRONIC 2016
Page 3
damage the machine.
•
To fill the tank, put the machine on a level place, open the liquid tank and pour high quality fog liquid into the tank.
Close the tank immediately after filling it.
•
It’s forbidden to spray directly towards persons. Keep far away from flammability and explosive objects
•
The fog is very hot, please keep a distance of at least 5 meters when using it
•
Please don’t touch the surface of the fog machine during the use because the housing will reach 40-80°C
•
When the machine doesn’t work, please check if the fuse is burnt out or not. If it is, replace it by an identical fuse,
find out the fault and restart the machine. But please note: the repair must be handled by professional.
Operating instructions
Wired Remote Control
•
Plug in the fog machine.
•
Plug the wired remote into the manual controller socket at the rear of the fog machine.
•
Press the button located on the remote to trigger the fog output.
•
The button is momentary which means that the fog machine will only output while the button
is pressed. Once the button is released, the fog will stop outputting.
Wireless remote Control
There is one transmitter and one receiver included. You may control up to 4 independent fog machines, or as many
as you want simultaneously. See the below instructions to how to operate the wireless remote.
1. Plug the wireless receiver into the fog machine.
2. There are 4 buttons on the transmitter. Each button can be assigned to a different fog machine. You may only
choose 1 DIP switch on each receiver. See the below configuration for setting the receivers to operate with the
transmitter.
CH1 1=On,2-4=Off
CH2 2=On,1,3,4=Off
CH3 3=On,1,2,4=Off
CH4 4=On,1,2,3=Off
Press the button and the fog machine will create fog momentarily as long as you hold down the button.
Wireless receiver
Wireless remote
control
Switch
Heating Led
Status led
