afx light 16-2905 User Manual Download Page 5

EN

5

www.afx-light.com

DMX PARAMETER

Channel

DMX address

Function

CH1

0-9

Fire off

10-255

Fire on

CH2

0-9

Close gas loading

10-255

Start gas loading

OPERATION

POWER ON

Connect the machine to an appropriate mains outlet and switch the ON/OFF button to ON. The 

RUN LED lights up in red. If a DMX controller is connected, the DMX light lights up in red.

DMX CONTROL

Connect a DMX512 controller via a DMX signal cable to the DMX IN connector. Push the pot meter 

of channel 2 to the maximum. Wait about 7 seconds until the RUN indicator flashes in green.
Push the potmeter of channel 1 to the max and the machine will shoot sparks.

Lower both potmeters to the miniumum position. If you want to shoot sparks again, push the 

potmeter of channel 2 to the top and wait until the RUN indicator flashes quickly in green. Then 

push channel 1 to the max.

ERROR MESSAGES

Error code E1: Lack of granulate. Please fill granulate into the hopper.
Error code E3: Lack or leakage of gas. Replace the gas cartridges.

POWER OFF AND CLEANING

1. 

Turn off the machine.

2.  Disconnect the power and the DMX signal cable.

3. 

Remove the gas cartridges and store them in a cool, dark, well ventilated place away from 

sunlight.

4. 

Check if foreign objects have entered the machine and remove them.

SPECIFICATIONS

Power supply ...........................................................................................

100-240V~50/60Hz

Consumption ......................................................................................................................

10W

Granule ................................................................................................Composite Ti (medium)
Powder consumption at max. output ..................................................................................

1g

Projection height

 ...................................................................................................................

3m

Powder tank capacity ..........................................................................................................70g
Gas cartridge ............................................................................. 2 x isobutane gas cartridges
................................................................................  with valve with a volume of 220g +/- 5g 
...............................................................

and a dimension of 68 (diam.) x 180m type cp 250 

Gas consumption ...................................................................................................

8-10g/min.

Weight .................................................................................................................................

16kg

Dimensions ..............................................................................................

400 x 350 x 285mm

IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local 

authorities or your dealer about the way to proceed.

Summary of Contents for 16-2905

























Reviews: