EN
10
© Copyright LOTRONIC 2020
Users are allowed to program their own color effects and save to your fixture in “Manual Color”.
Press “Menu” button until you see “Manual Color”. Scroll “UP” or “DOWN” to select the color, then
press “Enter” to confirm the color selection. Now press “UP” or “DOWN” to set color intensity.
Press “ENTER” to save your setting. Press “MENU” to exit from current setup.
When the fixture is switched off and then on again, the fixture will go back to what it was set at.
IR Remote Control
This operation mode allows users to control the fixture with an infrared remote controller. The re
-
mote controller allows to achieve almost all functions.
To control your fixture with IR controller, please set up Wireless DMX to “Off”.
To activate IR remote control, press “Menu” until “IR” appears, press “Up” or “Down” button and
select “On”. Press “Enter” to save the setting. To control the fixture with this IR remote controller,
make sure to point the controller directly to the IR receiving sensors on the product. Make sure
there are no objects between the controller and the fixture.
3. Set the fixture into blackout (LED on/off).
4. Adjust auto, strobe & fade speed, sound sensitivity, DMX ad
-
dress, DMX channel, brightness etc.
5. Run auto mode, use “Speed” button followed by the
but
-
tons to adjust auto speeds.
6. Run sound program, use
buttons to adjust sound sensi
-
tivity.
7. Run strobe program, use
buttons to adjust strobe speed.
8. Set auto/fade speed, Press this button followed by
buttons
to adjust program speed.
9. Set the fixture into master or slave mode.
10. Run fade mode. Use “Speed” button followed by
buttons to
adjust fade speed.
11. Set DMX address. Press this button followed by
to set up
DMX address. Press this button again followed by
to select
DMX channel.
12. Set the fixture in full brightness. Press this button followed by
buttons to adjust bright
-
ness.
13. Set the fixture in ECO mode. Press this button followed by
buttons to turn ECO mode on/
off.
14. Set static color. Press buttons in this area to select static color.
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but
deposited in separate collection points for recycling.
WARNING
The supplied remote control contains a button cell. In case of ingestion, it might cause serious in
-
ternal burns within only 2 hours that might lead to death.
Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the
reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of
the body, contact immediately a doctor.
