
EN
3
www.afx-light.com
POWER SUPPLY
This product uses an external power adaptor as the lamps are powered by DC28V. The external
power supply converts 100-250V~ voltage into 28V
𝌃
for use by the fixture.
Connect the supplied SD controller to the slabs as shown on the illustration.
Connect the SD controller to your PC
The SD controller has 8 outputs. Each output can drive to 16 columns. Each column can contain 28
slabs maximum. So one controller can connect: 8 * 16 = 128 slabs.
The following is the PC controller 3x3 signal line connection diagram:
Summary of Contents for 16-2040
Page 14: ...EN 14 Copyright LOTRONIC 2022...
Page 15: ...EN 15 www afx light com...
Page 16: ...Copyright LOTRONIC 2022...