EN
6
© Copyright LOTRONIC 2019
Color 58
Red + Green + Blue + White + Purple
Color 59
Red + Green + Blue + Amber + Purple
Color 60
Red + Green + White + Amber + Purple
Color 61
Red + Blue + White + Amber + Purple
Color 62
Green + Blue + White + Amber + Purple
Color 63
Red + Green + Blue + White + Amber + Purple
2. AUTO (AUTO PROGRAMS SETTING)
This mode runs the built-in automatic programs.
Press
MENU
to select
AUTO
mode and press
ENTER
.
Use the UP and DOWN buttons to select the built-in automatic programs.
Built-in auto:
Pro 01 ~ Pro 10
;
Built-in auto program speed:
AUTOSP [ 001 ~ 100 ]
(Slow – Fast)
In this mode, the device will be set automatically as the Master unit.
3. ADDRES (DMX ADDRESS SETTING)
Press MENU to select the ADDRES mode, press ENTER. Then use UP and DOWN buttons to set the
desired DMX address (ADDR 001 - 512)
4. DMX MODE (DMX CHANNEL MODE SETTING)
Use this mode to set the device to DMX controller mode with optional DMX channels.
There are 5 DMX channel modes to be selected.
Press
MENU
to select the
DMX MODE
, press ENTER. Then use the UP and DOWN buttons to set the
DMX channel modes.
6 Ch
8 Ch
12 Ch
HSV (H = Hue, S = Saturation, V = Brightness)
HSI (H = Hue, S = Saturation, I = Intensity)
Please refer to DMX VALUES chart for the channels detail.
5.SLAVE MODE
You can use this mode to set the unit to run as Master or Slave model
The unit default setting is “Slave”
Press
MENU
to select the
Slave Mode
, press ENTER. Use UP and DOWN to select the desired set-
ting: Master/ Slave.
6. WHITE BALANCE
This mode is for user to set the custom configurable setting of white balance.
Press
MENU
to select the
White Balance
mode, press ENTER.
Use UP and DOWN to select Balance [ Red ] / [Green ] / [ Blue ], press ENTER
Red [ 000 – 255], Green [ 000 – 255], Blue [ 000 – 255] display, use UP and Down to adjust the
numeric value.
Press MENU to save the setting and go back.
7. DIMMER (DIMMER CURVES SETTING)
Press
MENU
to Select
Dimmer
Mode, press ENTER, then use UP and DOWN to select the following
dimmer modes:
[ OFF ]
(Linear dimmer mode, close dimmer curves, instant dimmer response)
[Curve 1 ]
Dimmer curve1, Square Law dimming.
[Curve 2 ]
Dimmer curve2, Inverse-square Law dimming.
[Curve 3 ]
Dimmer curve3, S-Curves dimming.
