AFRISO KSG Magnum, Operating Instructions Manual

Page: 20 / 64

4
Information on safety
EN
KSG Magnum
2.2 Intended use
This product may only be used for automatic venting of sealed heating sys-
tems (as per EN 12828) with a heating capacity of up to 200 kW (G1
1
/
4
) or
with a heating capacity of up to 350 kW (G1
1
/
2
). The product consists of a dia-
phragm safety valve, a pressure gauge and a quick air vent.
The diaphragm safety valve may only be used to discharge the following
media from heating systems for the purpose of providing protection against
excess pressure:
• Water
• Water/glycol mixtures
The pressure gauge may only be used to indicate the system pressure of the
heating system.
The quick air vent may only be used to automatically de-aerate the heating
system.
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
• All directives, standards and safety regulations applicable at the installa-
tion site of the product
• All conditions and data specified for the product
• The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.
When using the product, perform all work and all other activities in conjunc-
tion with the product in compliance with the conditions specified in the oper-
ating instructions and on the nameplate, as well as with all directives, stand-
ards and safety regulations applicable at the installation site of the product