42
Operation
EN
GWG 23-Ro / GWG 23-Wa / GWG 23-T
6
Operation
6.1
Use in flood hazard areas
The product is suitable for use in flood hazard areas; it is watertight up to
10 mH2O (1 bar pressure).
After a flood, the product does not have to be replaced.
7
Maintenance
The product is safety equipment. Correct operation of the product must be
verified at least every 10 year with a suitable tester.
During the function test, switching off and the witch-off time (
≤
1.5 s) must be
tested.
1. Submerge the PTC thermistor into liquid.
2. Document the results of the function test in the "Report function test pro-
tection level sensor".
- Visit www.afriso.com for the report.
8
Troubleshooting
Malfunctions may only be repaired by the manufacturer.
NOTICE
INOPERABLE PRODUCT
•
Verify that the fitting for wall mounting of "GWG 23-Wa" is replaced after a
flood.
Failure to follow these instructions can result in equipment damage.
Summary of Contents for GWG 23 Series
