AFRISO Eurovac HV, Operating Instructions Manual

Page: 62 / 286

5
Information on safety EN
Eurovac HV
The permissible density of the liquid depends on the tank used and its con-
tent:
Tank as per Hydrostatic height Permissible density
of stored liquid
EN 12285-1

Class A
≤
3.0 m
≤
1100 kg/m³
EN 12285-1,

DIN 6608,

EN 12285-2,

DIN 6616
≤ 3.0 m

≤
2.5 m

≤ 2.0 m

≤
1.6 m
≤ 1019 kg/m³

≤
1223 kg/m³

≤ 1529 kg/m³

≤
1900 kg/m³
DIN 6618-2
≤
15.95 m

≤ 12.75 m

≤
9.585 m
≤
1120 kg/m³

≤ 1470 kg/m³

≤
1900 kg/m³
DIN 6619
≤
2.84 m

≤ 2.76 m

≤
2.6 m

≤ 1.9 m
≤
1060 kg/m³

≤ 1090 kg/m³

≤
1160 kg/m³

≤ 1580 kg/m³
DIN 6623,

DIN 6624
≤ 1.2 m ≤ 1900 kg/m³
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
• All directives, standards and safety regulations applicable at the installa-
tion site of the product
• All conditions and data specified for the product
• The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.