AFRISO DKH, Operating Instructions Manual, Page: 29 / 54

11
Mounting
EN
Pressure gauge push-button stop cock
5 Mounting
5.1 Mounting the product
Any mounting position is permissible.
1. Screw the product onto a T piece of the gas line so that it is tight.
- Verify correct direction of flow (indicated by an arrow on the product)
2. Firmly screw in the pressure gauge.
- Seal materials: DIN 3535 T3, T4; DIN 30660/30661; CU profile seal
WARNING
MEDIUM ESCAPING UNDER PRESSURE
• Verify that there is no pressure in the system.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
WARNING
ESCAPING GASES
• Verify that the product is only installed in dry, well-vented rooms.
Failure to follow these instructions can result in death, serious injury or
equipment damage.