AFRISO 52151, Operating Instructions Manual, Page: 76 / 147

27
Mounting
TankControl 10
EN
EN
5.5.2 Connecting an additional submersible probe (optional)
1. Route the probe cable through the centre cable gland into the control
unit.
2. Connect the probe cable to "Sensor2" as follows:
- black to terminal "Shield"
- green to terminal "Signal"
- brown to terminal "AGND"
- white to terminal "Vcc"
3. Enable the software for the additional probe at the control unit see "Set-
ting the password".
5.5.3 Connecting the floating probe (optional)
1. Route the probe cable through the centre cable gland into the control
unit.
2. Connect the probe cable to "Sensor2" as follows:
- Terminal "Signal"
- Terminal "AGND"
3. Enable the software for the additional probe at the control unit see "Set-
ting the password".