AFL HIBUS HCS Series Installation Procedures Download Page 3

Page: 3 / 4

www.AFLglobal.com or (800) 866-7385

Specifications are subject to change without notice.

Installation Instructions

HCS-INSP001

Position HIBUS Suspension Clamp to align the groove bushings to encapsulate conductor as shown in

Fig. 3-1

Squeeze the bottom of the HIBUS Suspension Clamp to close the clamp around the conductor as shown in

Fig. 3-2.

Visually inspect Suspension Clamp to ensure that the assembly [groove–bushings (both ends)] and conductor are not cocked or misaligned.

Install Clamping Bolts (items 2, 3, 4, and 6) into the HIBUS Suspension Clamp.

Hand tighten mounting hardware to engage threads with the Suspension Clamp.

Alternate tightening to ensure HIBUS Conductor Suspension Clamp is not misaligned as shown in

Fig. 3-2

Fig. 3-1

HIBUS SUSPENSION CLAMP SHOWN IN

POSITION TO ENCAPSULATE CONDUCTOR

Fig. 3-2

HIBUS SUSPENSION CLAMP SHOWN INSTALLED

ON CONDUCTOR WITH MOUNTING HARDWARE

INSTALLED

1/2" CLAMPING BOLT

1/2" BELLEVILLE WASHER

1/2" FLAT WASHER

O-RING

BUSHINGS

CONDUCTOR

HIBUS SUSPENSION CLAMP

BUSHINGS

CONDUCTOR

Summary of Contents for HIBUS HCS Series

Page 1: ...S INSP001 Installation Procedure for HIBUS HCS Series Conductor Suspension Clamp Assembly Reference B9409 NOTE EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT THESE DRAWINGS AND OR SPECIFI CATIONS ARE THE PROPERTY OF AFL ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF PRODUCT WITHOUT PERMISSION ...