
3
Safety Information
WARNING!
Use of procedures or adjustments other than those specified herein may result in
hazardous radiation exposure .
NOTE!
ROGUE testers contain Bluetooth / WiFi Transceiver
FCC ID: TFB-TIWI1-01
IC ID: 5969A-TIWI101
CAUTION!
To avoid serious eye injury, never look directly into the optical outputs of fiber optic
network equipment, test equipment, patch cords, or test jumpers . Refer to your company’s safety
procedures when working with optical systems .
WARNING!
Use only the specified AC adapter . Use of another type of AC adapter can damage
the instrument and create the danger of fire and electrical shock .
AC adapter should be 90-240VAC input, 15Vdc @ 2 .4A, with center positive connector
WARNING!
To avoid the danger of fire and electrical shock:
•
Never use a voltage that is different from that for which the AC adapter is rated .
•
Do not plug the device into a power outlet that is shared by other devices .
•
Never modify the power cord or excessively bend, twist, or pull it .
•
Do not allow the power cord to become damaged . Do not place heavy objects on the power
cord or expose it to heat .
•
Never touch the AC adapter while your hands are wet .
•
Should the power cord become seriously damaged (internal wiring exposed or shorted),
contact the manufacturer to request servicing .
CAUTION!
Do not run any tests or perform functions that activate an LED/LASER output port
unless fiber cable is attached to the corresponding output port .
NOTICE!
ROGUE Testers contain no user serviceable parts . Except for changing batteries and
cleaning optical ports, this instrument must be returned to AFL or authorized agents for repair and
calibration .
IMPORTANT!
Proper care in handling should be taken when using any precision optical test
equipment . Scratched or contaminated optical connectors can impact the performance of the
instrument .
IMPORTANT!
It is important to keep connector end-faces on the launch and receive cables and
those on the Fiber Under Test (FUT) clean, to ensure accurate measurements and operation .