• Stand the iron on its heel on a level, stable, heat-resistant
surface.
• Insert the plug into the mains power socket
• Turn the temperature control dial to 'MAX'.
• Allow the appliance to warm up for ten minutes. This will allow
any dust and manufacturing residues to burn away. A small
amount of smoke may be released from the appliance whilst it is
warming up. This is normal and does not indicate a problem with
the appliance.
• Make sure there is sufficient ven�la�on.
• Take the appliance by the handle.
• Hold the appliance horizontally above a sink or (wash) basin.
• Press the steam bu�on (bu�on up) in order to ac�vate the steam.
• A�er 1 minute, turn the steam off by pressing the steam bu�on
again (bu�on down).
• Turn the temperature to se�ng '0FF'.
• Stand the iron on its heel on a level, stable, heat-resistant surface.
• Remove the plug from the mains power socket.
• Allow the appliance to cool.
• Con�nue with the procedure in 'Using the appliance'.
Using the appliance
• Fill the water reservoir with water via its opening. Only use the
measuring cup provided.
• Open the filling opening.
• Fill the water reservoir via its opening.
•
Close the opening.
• Check that the water level in the water reservoir does not go
over the maximum mark.
• Stand the iron on its heel on a level, stable, heat-resistant surface.
• Insert the plug into the mains power socket.
• Set the temperature control dial to the desired se�ng. The
temperature indicator will be lit. The temperature indicator light
