19
Pre-use
Now after learning through all the operating instructions,
before starting to use the
Breeze
, do a visual check
through the all the parts of the vehicle, to make sure
that no external damage has been occur to the vehicle
while transportation. In any case you are not sure call
your dealer and ask for an explanation.
Controller
Programming
Several parameters of the
Breeze
Controller can be
programmed with a special Programmer.
Programming should be done by trained authorized
technician only. Wrong programming can cause
abnormal operation of the
Breeze
,Harm persons and
Injury.
Performance
check
It is very much recommended that when receiving as
new or from another user or after a period of not using
the
Breeze
a performance check will be made as
follows:
1. Switch on the main switch.
2. See that on the display panel – the battery indicator
is lit and the Ready/ON led is lit as well.
3. Squeeze the speed lever slowly and make sure that
the
Breeze
is traveling with correspondence to the
squeezing on the lever.
4. Release the lever and make sure that the
Breeze
is
stopping softly and that you hear a click coming from
the EMB engaging.
5. Make a check of all the buttons functions on the
handlebar.
6. Switch off the main key switch. Your
Breeze
is now
ready to drive.
Pre-use
measures
The user should know his weight and all other loads is
lower than the maximum of 160 Kg (352lbs).
If not sure it should be measured.
