❖
Reading the LED Lamps
ATU34S
1. Green: turns on when the printer is properly
connected to the network.
2. Yellow: turns on when 100BASE-TX is in use. It
turns off when 10BASE-T is in use.
USB Connection
•
A USB cable is not supplied with this printer.
Select your cable according to the computer.
•
USB connection is possible under Windows Me/
2000/XP, Windows Server 2003, Mac OS 9.x, and
Mac OS X.
•
Windows Me supports USB1.1 speed.
•
USB connection with Mac OS is only possible via
the printer's USB port.
Connect the smaller connector of the
USB cable to the USB port on the left
side of the printer.
ATU036S
Connect the opposite end's flat connec-
tor to the desired device such as your
computer's USB interface, or a USB
hub.
Quick Installation Guide
2/2
Selecting the Display
Language
Displays are shown in the selected language. The lan-
guage is set to English by default, so the following pro-
cedure is not required to view displays in English.
Press the
{
Menu
}
key.
ATU050S
Press the
{
▼
}
or
{
▲
}
key to select [Lan-
guage], and then press the
{
OK
}
key.
Press the
{
▼
}
or
{
▲
}
key to select the
preferred language, and then press the
{
OK
}
key.
Press the
{
Menu
}
key to return to the
initial screen.
Press the
{
▼
}
or
{
▲
}
key to select
[Host Interface], and then press the
{
OK
}
key.
Press the
{
▼
}
or
{
▲
}
key to select
[Network], and then press the
{
OK
}
key.
Press the
{
▼
}
or
{
▲
}
key to select [Ma-
chine IPv4 Address], and then press the
{
OK
}
key.
Press the
{
▼
}
or
{
▲
}
key to select
[Auto-Obtain (DHCP)], and then press
the
{
OK
}
key.
The printer will automatically receive an IP address.
To check the detected addresses, press the following:
• [IP Add.] : IP address
• [Subnet M] : Subnet mask
• [Gateway] : Gateway address
Press the
{
MENU
}
key to return to the
initial screen.
Print a configuration page to confirm
the settings.
•
For details about printing the configuration page, see
“Test Printing”.
Test Printing
Print a test print in order to verify that the printer is
working normally. Test printing checks printer perfor-
mance only; it does not test the connection to the com-
puter.
Press the
{
Menu
}
key.
ATU050S
Press the
{
▼
}
or
{
▲
}
key to select [List/
Test Print], and then press the
{
OK
}
key.
Press the
{
▼
}
or
{
▲
}
key to select
[Config. Page], and then press the
{
OK
}
key.
The configuration page will be printed.
If printing is not normal, check if an error message
appears on the display. If there is an error message,
see “Troubleshooting”, Hardware Guide.
Press the
{
Online
}
key to return to the
initial screen.
Network Connection
Prepare the hub and other network devices before con-
necting the 10 BASE-T or 100 BASE-TX cable to the
machine's Ethernet port.
•
Use a shielded Ethernet cable. Unshielded cables
create electromagnetic interference that could
cause malfunctions.
•
An Ethernet cable is not supplied with this ma-
chine. Select your cable according to the network
environment.
Attach the ferrite core at the printer
end of the Ethernet cable, next to the
connector.
ATU632S
Connect the Ethernet cable to the
Ethernet port that is located on the left
side of the printer.
ATU032S
Connect the other end of the cable to the
network, for example using a hub.
•
For details about network environment settings, see
Software Guide.
Ethernet Configuration
You can use SmartDeviceMonitor for Admin or a Web
browser to configure IP address-related settings in a
TCP/IP-capable environment.
•
Configure the printer for the network using the
control panel.
•
The following table shows the control panel
settings and their default values.
These items appear in the [Host Interface] menu.
•
After configuring the network setting, configure
the security settings.
Setting Name
Default
•
Machine IPv4 Address
DHCP
On
IPv4 Address
011.022.033.044
Subnet Mask
000.000.000.000
Gateway Address 000.000.000.000
•
IPv6 Stateless Setting
Stateless set
Active
•
NW Frame Type Auto Select
•
Effective Protocol
IPv4
Active
IPv6
Inactive
NetWare
Active
SMB
Active
AppleTalk
Active
•
Ethernet Speed Auto Select
•
LAN Type
Ethernet
•
If DHCP is in use on your network, the IP address,
subnet mask, and gateway address are all set
automatically.
•
Configure these settings as necessary. See Software
Guide.
❖
Receiving an IP Address Automatically
(DHCP)
•
When [DHCP] is selected, you cannot configure
settings for the following items:
•
IP Address
•
Subnet Mask
•
Gateway Address
•
Consult your network administrator for information
about configuring network settings.
Press the
{
Menu
}
key.
ATU050S
Quick Installation Guide
CLP240D/C7640nD/LP440c/Aficio SP C811DN
