3
FIBER CONNECTION
The fiber optic connection is made via a FC/PC connector located on the back of the unit. Be
sure to allow sufficient room for the required minimum bend radius of the fiber cable used.
VIDEO OUTPUT CONNECTION
The video output connection is made via a BNC connector on the back of the unit. The 75
Ω
video output can be looped through typical baseband video inputs of switchers, recorders and
other equipment as required. For proper operation, the output must be terminated with 75
Ω
. For
optimum performance the video cables should be the shortest length of coax practical.
RR-910D-SL STATUS INDICATORS
The RR-910D-SL transmitter provides the following LED status indicators described below and
on the next page to aid in installation and troubleshooting:
VLI
A bi-color LED indicator is provided for the video output from the RR-910D-SL. DC power and
video status associated with this LED are summarized below.
Video Presence LED
DC Power Status
Video Status
Green
On
Proper Output Video Present
Red
On
Output Video Not Detected
Off
Off
Check Power Supply
