ILS120 - illuminated double-sided ReFrame®
assembly instructions
www.afibranding.com.au
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Applying your custom ReFrame® fabric skin
12
Developed by AFI Branding
Now that you’ve finished assembling your ReFrame®, it’s time to apply your custom ReFrame® fabric skin. Please refer to
either a printed
‘ReFrame® Fabric Installation Guide’
or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE:
The assembly instructions for the ILS120 (and included components) illustrate the fundamental steps to assemble a
‘standard’ Illuminated Double-Sided type ReFrame®. If your Reframe® is oversize, has additional components such as joiners
(not shown on this fact sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please
contact the team at AFI Branding on 1300 652 514 and we will guide you through the assembly process.
Slide top and side length together
Attach the remaining two corners at
the same time
Ensure corners are aligned then
tighten screws using allen key
Connect the LED lighting strip ‘Male’
plug and external ‘Female’ plug
Connect the ReFrame® Power
Adapter to the external cable
Repeat on the opposite corner so that 3 lengths are
connected
4
6
7
Repeat this process on all corners
8
9
10
Connect the power pack to the
power cord.
11
5
