AFi ReFrame illuminated double-sided Assembly Instructions Download Page 1

Page: 1 / 2

www.afibranding.com.au

1300 652 514

33 Lakewood Blvd, Carrum Downs, Vic, 3201

Corner Brackets

ReFrame® Lengths

Allen Key

ReFrame® Power

Adapter

1x
1x

CHECKLIST

ILS120 - illuminated double-sided ReFrame®

assembly instructions

Lay out the ReFrame®

components on a flat

surface and ensure you have

everything required before

you start the assembly.

Stack corner brackets as pictured - the bracket with screws goes on top and the blank bracket on the bottom

Insert the stacked corner brackets into the channels of the top and bottom lengths of frame (screws may need to be

loosened to allow brackets to slide into position)

NOTE: To ensure a precise line-up of the frame profiles, do not tighten any of the screws until you have reached step 7

Summary of Contents for ReFrame illuminated double-sided

Page 1: ...urface and ensure you have everything required before you start the assembly Stack corner brackets as pictured the bracket with screws goes on top and the blank bracket on the bottom 2 3 Insert the st...

Page 2: ...fundamental steps to assemble a standard Illuminated Double Sided type ReFrame If your Reframe is oversize has additional components such as joiners not shown on this fact sheet accessories or has be...