Attach the remaining two corners at the same time
Repeat step 7 on all remaining corners
Insert the allen key into the pre-drilled holes to ensure
alignment with the corner bracket holes
5
8
6
Ensure corner is aligned and then tighten screws using
allen key
7
DS101 - double-sided ReFrame®
assembly instructions
www.afibranding.com.au
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Applying your custom ReFrame® fabric skin
9
Developed by AFI Branding
Now that you’ve finished assembling your ReFrame®, it’s time to apply your custom ReFrame® fabric skin. Please refer to
either a printed
‘ReFrame® Fabric Installation Guide’
or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE:
The assembly instructions for the DS101 (and included components) illustrate the fundamental steps to assemble a
‘standard’ Double-Sided type ReFrame®. If your Reframe® is oversize, has additional components such as joiners (not shown on
this fact sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please contact the team
at AFI Branding on 1300 652 514 and we will guide you through the assembly process.
