www.afibranding.com.au
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Insert corner brackets into the channels of the top and bottom lengths of frame (screws may need to be loosened to
allow brackets to slide into position)
NOTE: To ensure a precise line-up of the frame profiles, do not tighten any of the screws until you have reached step 7
2
1
CHECKLIST
Slide top and side length together
Repeat on the opposite corner so that 3 lengths are
connected
3
4
1
DS101 - double-sided ReFrame®
assembly instructions
Lay out the ReFrame®
components on a flat
surface and ensure you have
everything required before
you start the assembly.
Screws
8x
Allen Key
1x
ReFrame® Lengths
4x
Corner Brackets
4x
